China factory woven fiberglass curtain wall mesh fabric

Looking for a reliable supplierwoven fiberglass mesh for exterior walls? This article will help you understand the key characteristics, application and selection of the optimal solution fromChinese factories. We will consider the factors affecting the quality and durability of the mesh, and also provide advice on its use in construction and decoration.

Introduction towoven fiberglass mesh for exterior walls

Woven Fiberglass Mesh for Exterior Wallsis a reinforcing material widely used in construction to increase the strength and stability of plaster and finishing layers. It is made by weaving fiberglass threads treated with special compounds to protect cement mortars from the alkaline environment. Due to its properties,woven fiberglass mesheffectively prevents the formation of cracks and increases the service life of the facade.

Benefits of usewoven fiberglass mesh

Usagewoven fiberglass meshin the exterior decoration of buildings has a number of significant advantages:

• Strengthening:Reinforcement of the plaster layer, increasing its resistance to mechanical damage.
• Preventing cracks:Compensation of shrinkage deformations, reducing the risk of cracks.
• Improved adhesion:Ensuring better adhesion of the plaster to the base.
• Environmental resistance:Protection from moisture, temperature changes and ultraviolet radiation.
• Durability:Increasing the service life of the facade.

Main Featureswoven fiberglass mesh

When choosingwoven fiberglass meshThe following characteristics must be taken into account:

• Density:Determines the strength and resistance of the mesh to loads (measured in g/m2).
• Cell size:Affects the degree of reinforcement and adhesion of the plaster (measured in mm).
• Weave type:Determines the structure and strength of the mesh (plain, twill).
• Processing:Alkali-resistant impregnation, providing protection against the aggressive environment of cement mortars.
• Roll width:Determines ease of use and minimizes waste.

Supplier selectionwoven fiberglass mesh: Chinese factories

Chinese factoriesare major producerswoven fiberglass meshoffering a wide range of products at competitive prices. When choosing a supplier from China, it is recommended to pay attention to the following aspects:

• Manufacturer reputation:Study reviews and references about the company.
• Product certification:Make sure you have quality certificates (ISO, CE, etc.).
• Production capacity:Evaluate the plant’s capabilities to fulfill your order.
• Delivery terms:Agree on terms of payment, delivery and warranty.
• Technical support:Find out about availability of technical support and product application advice.

Hebei Blue Diamond International LLC (https://www.ifiberglass.ru/) offers a wide rangewoven fiberglass mesh, meeting high quality standards. You can get advice and order product samples for testing.

Applicationwoven fiberglass meshin exterior decoration

Woven Fiberglass Meshused to reinforce the following layers of exterior finishing:

• Plaster facades:Strengthening the plaster layer, preventing cracks.
• Facade insulation systems:Reinforcement of the base plaster layer in 'wet facade' systems.
• Facing stone:Strengthening the adhesive layer when installing facing stones.
• Mosaic coverings:Reinforcement of the base for mosaics.

Installation technologywoven fiberglass mesh

Installationwoven fiberglass meshis done as follows:

1. Surface preparation:Cleaning and leveling the base.
2. Application of adhesive composition:Uniform application of the adhesive composition to the surface.
3. Laying the mesh:Laying the mesh with an overlap of 10-15 cm, pressing it into the adhesive composition.
4. Surface leveling:Removing irregularities and excess glue.
5. Applying the finishing layer:After the adhesive layer has dried, apply the finishing plaster layer.

Approximate prices forwoven fiberglass meshfromChinese factories(2024)

Prices forwoven fiberglass meshdepend on density, mesh size, type of weaving and order volume. Below is a table with approximate prices:

Typical errors when usingwoven fiberglass mesh

To avoid problems when usingwoven fiberglass mesh, the following mistakes should be avoided:

• Using a low-quality mesh:Use of mesh with low quality fiberglass or insufficient alkali resistance.
• Incorrect mesh selection:Selecting a mesh that does not match the type of plaster or operating conditions.
• Incorrect installation:Insufficient overlap, poor pressing into the adhesive composition.
• Violation of technology:Apply plaster until the adhesive layer is completely dry.

Conclusion

Woven Fiberglass Mesh for Exterior Walls- This is an important element of modern building finishing, providing strength, durability and aesthetic appearance of the facade. Selecting the right supplier, taking into account the characteristics of the mesh and following installation technology will help you avoid problems and ensure a high-quality result. When choosingChinese factoryAs a supplier, carefully check reputation, certification and delivery conditions. Feel free to request product samples and expert advice from, for example, Hebei Blue Diamond International LLC, for the optimal choice of material for your project.

Please note: the prices shown in the table are indicative only and may vary depending on the specific supplier and order quantity.

Sources: Data is based on analysis of the construction materials market and information provided byChinese factories-manufacturerswoven fiberglass mesh.