Products
-
Fiberglass Mesh Fabric for Reinforcement of Stone and Mosaic Substrate
-
Chopped fiberglass felt
-
Fiberglass reinforced plastic board
-
Fiberglass mesh tape
-
Fiberglass fabric
-
PVC corner edge
-
Metal Corner Tape
-
Spray masking protective film
-
Fiberglass Mesh Fabric for EPS Special Improvement Line
-
Fiberglass mesh for roof waterproofing
-
Paper connecting tape
-
Fiberglass woven roving
-
Fiberglass mesh fabric for wall insulation and reinforcement.
-
Fiberglass Window Screen
AR fiberglass cut thread
AR glass fiber is a high alkali resistant general purpose glass fiber for pre-mixing with other materials to form a mixture that is formed into GRC molded parts using vibratory casting or other processes.
Description
marker
Fiberglass woven roving
AR glass fiber is a high alkali resistant general purpose glass fiber for pre-mixing with other materials to form a mixture that is formed into GRC molded parts using vibratory casting or other processes.
It mixes easily even at high dosages and has good clustering properties after mixing. Used in the production of standard GRC components such as sanitary or instrument boxes, or in building structures such as lightweight partition panels. The zirconium oxide content of 16.7% of the short-cut yarn produces components with better late strength properties.
| Products | Yarn length | Packing Specification | Weight of one bag |
| ARC15-170-XmmH | 6、8、12、16 20、24、28、32
| 550x550x65mm | 15kgs |
| Tray size | Length 1110 mm | Width 1110 mm | Height 1220 mm |
Storage conditions:
The original packaging should be kept to keep the inside dry, preferably in a room with a temperature of 15°C - 35°C and a relative humidity of 35% to 65%. If the product is stored at low temperatures (below 15°C), it is best to store it in a production area for 24 hours before use to prevent condensation.
contact us
Related Popular Products
Chopped fiberglass felt
Chopped fiberglass felt is a non-woven fiberglass material with no alkali or medium alkali made from continuous strands of glass fiber cut into 50mm lengths, uniformly distributed in a non-directional manner and bonded to a powdered polyester or emulsion binder.
Fiberglass mesh fabric for wall insulation and reinforcement.
Technical characteristics: Grammage: 45g/m2-350g/m2 Cell size: 2.5×2.5 mm, 3×3 mm, 4×4 mm, 4×5 mm, 5×5 mm, 8×8 mm, 10×10 mm Width: 20cm–200cm Roll length: 10 m–300 m Color: white (standard), blue, orange, green, red etc.
Fiberglass mesh for roof waterproofing
Because the waterproof medium itself has no strength, when temperature, wind, water, sunlight and other external forces change, it will inevitably crack, leak, and be unable to play a waterproof role.
Fiberglass Window Screen
Our PVC fiberglass window screens have excellent properties such as fire resistance, corrosion resistance, heat resistance, easy to clean, good ventilation, high strength and structural stability.
Fiberglass fabric
Fiberglass fabric has several advantages, such as fire resistance, corrosion resistance, high temperature resistance, structural stability, tensile shrinkage resistance, high strength, etc.
Fiberglass Mesh Fabric for EPS Special Improvement Line
Fiberglass mesh fabric for EPS lines has the characteristics of tractability, high strength, good toughness, etc.
Spray masking protective film
Product Description: The camouflage film is made of polyethylene film as...
Fiberglass mesh tape
Fiberglass mesh tape made of fiberglass mesh fabric bonded with self-adhesive emulsion.
Fiberglass reinforced plastic board
Fiberglass reinforced plastic board is a lightweight, high-strength, high-adhesive, easy-to-work patch widely used to repair damaged roofs or walls. The repair surface is smooth and beautiful, without seams or unusual sensations.
Fiberglass Mesh Fabric for Reinforcement of Stone and Mosaic Substrate
Fiberglass mesh fabric will be pasted on the back of the marble or mosaic, thanks to the adhesion of the fiberglass mesh, excellent positioning, can evenly disperse the stone in construction when applying tensile force, and play the role of strengthening and protecting.
Paper connecting tape
Paper joint tape is widely used in building decoration, painting and other occasions, it can effectively combine with drywall, cement board and other building materials, can hide cracks, make up for the deficiencies of putty, improve the crack resistance of the wall and increase elongation.
PVC corner edge
Our corner beads are made of new modified PVC material with good weather resistance and durability, and are designed to meet local needs according to the architectural styles and needs of different parts of the world. Our products are exported to Europe, America, Australia, Southeast Asia, South America and other countries and regions.
Fiberglass woven roving
It is widely used in hand-molded and institutional molded products such as boats, containers, aircraft and automobile parts, furniture, sports facilities and other fields.
Metal Corner Tape
Regular size is 50mm x 30m, also can be customized according to client's requirements.